PADS are plastic disks on the rear of the letters. Secure
the letters to the wall with silicone adhesive. Adjustable or flush
pads available upon request.
STUDS are metal threaded posts on the rear of the letters.
Specify stud lengths of 1", 2", 3", 4", 5" and 6". Specify if studs
need to be in line for brick or block wall mortar joints.
COMBINATIONS have pads at the bottom and pad/stud
combinations at the top of the letter. Specify if studs need to be in
line for brick or block wall mortar joints. Not for letters under
6".
COMBINATION ALL letters have stud through pads on all
mounts. Specify if studs need to be in line for brick or block wall
mortar joints. Not for letters under 6".
BRACKETS are L-shaped plastic projections flared outwards
from the back of the letter. For brackets flared inward or for letters
over 18", brackets will be shipped unattached.
WIRES are stainless steel hooks inserted into plastic blocks
glued to the inside of the letter. Available for flush mounting or with 1/2", 1", 1-1/2" or 2" standoffs.
